秀设计 » 椅子

绳索围绕的椅子

Sarah — Sat, 03 Jul 2010 10:02:39 +0000

工业钢丝绳+卷曲+桦木胶合板

M-Chair

.:YYY:. — Thu, 24 Jun 2010 11:40:03 +0000

[原创投稿] 可拆装家具将是未来家具发展的新方向，它不仅让我们生活的空间得到充分的利用，而且它更是品味生活的一种体现。

对年轻时尚的消费者来说，本时尚概念家具设计可以充分发挥了人的想像，而且增添不少生活的情趣，实现了个性化、实用化、情趣化的家居理念。特别是在居住环境日趋紧张的情况之下，易拆装的家具越来为人所青睐.

本设计主要采用滑块夹子、固定转轴等新的结构方式，以达到免去使用其他外在工具就能快速方便进行拆装。同时本设计提出新的使用方式，利用椅面的可换性使得生活更具多元化、随性化，增强了人与该产品之间的互动性。人们在休息的同时，也能感受椅子为自己赋予的贴心关怀。

M-chair椅子设计草图:

M-chair椅子使用说明:

作者：极点

邮箱：jc_simen#126.com（替换#为@）

如果您对该产品感兴趣可以联系作者或者秀设计

Cloth

.:YYY:. — Fri, 28 May 2010 01:03:54 +0000

It’s not just a ‘cloth’ – this minimalist armchair by the German designers Jehs & Laub is one of the novelties Cassina presented at the ‘Milano Design Village’ in Zona Tortona during this year’s Salone del Mobile. Composed of an internal supporting fibreglass frame with polyurethane foam padding and a fabric or leather upholstery ‘Cloth’ joins the visual linearity of Cassina’s characteristical collection.

Due to to two zips that run right around the perimeter of the armchair the polyester lined covering is easy to remove. Cloth is available in single colour or two-tone versions.

Stud

.:YYY:. — Thu, 20 May 2010 03:07:15 +0000

It’s more than just a stud, it’s two studs. Right here we’ve got a table and chair set by the name of “Stud.” It’s heavy on the stud, easy on the sitting at the table chilling out, fabulous on the eyes. This Stud refers to a small button or earring in that together, the stud chair and table appears to be wearing tiny earrings itself! Designer Cho Hyung Suk aimed here to create a chair composed of only one module. Here it is. Stay seated.

You’ve only got one bending module. Thus, you’ve got a lovely place to sit and/or one lovely place to place your drink. Sit on both buttcheeks though, you can’t be avoiding that.

Made of steel and bent wood.

Size:
Chair; 550*560*670(H)
Table; 430*550*350(H)

Hat-Hat

.:YYY:. — Wed, 12 May 2010 09:58:17 +0000

Commissioned in connection to the Wallpaper exhibition “Handmade” in Milan, the German-Swedish designer Katrin Greiling created this new piece of furniture for both sitting and sleeping, inspired by the bedouins way of furnishing their tents: “when the tent is set up and the carpets rolled out the saddle is taken off the camel and put inside the tent and functions as leaning support whilst sitting on the floor. The name ‘Hat-Hat’ derives from the phrase the Bedouins use to get the camels to move.”

NEMO

.:YYY:. — Tue, 20 Apr 2010 14:20:14 +0000

Fox & Freeze FF1 Lounge Chair

.:YYY:. — Thu, 15 Apr 2010 09:02:25 +0000

If there was ever a material making a comeback as of late it’s definitely Felt. Not only does it have a great look, it’s structural properties are extremely interesting; lightweight, sturdy, malleable -all things designers typically drool over. Belgian design-duo James Van Vossel and Tom de Vrieze, through their creative coop Fox & Freeze, have created an ingenious indoor lounge chair set to rival the Fat Boy you’ve got in your living room. Made from a single square sheet of synthetic felt, the FF1 Chair is entirely self-supporting, with only a flax rope added for aesthetic purposes. Surprisingly sturdy (see after the jump), the twisting of the felt flows together to create the seat & base.

Offset

.:YYY:. — Wed, 31 Mar 2010 02:15:29 +0000

Italian designer Giorgio Biscaro will present a flat-pack stool made of bent plywood at the Salone Satellite in Milan next month.

Called Offset, the seat is made of slices cut from one piece of bent plywood attached to three leg profiles by metal bars.

Italian designer Giorgio Biscaro will exhibit during the upcoming Milan Design Week at Salone Satellite, the showcase for young designers from all around the world.

This year, the collection counts almost twenty new products, and includes light fixtures, furniture, kitchenware and more.

The item previewed here is Offset Stool. It’s the result of a deep research into bent plywood, its possibilities in furniture, and manufacturing process optimization.

Offset stool is obtained through the repetition of some plywood strips bent at the same angle, manufactured by the producer by bending a long, single sheet of plywood and then cutting it into pieces. These pieces are drilled and paired to three pantograph cut legs through three couples of little iron bars to avoid glueing and provide extra stiffness. At this stage, the stool is a compact body, but its resulting shape is still quite uneven, because all the bent stripes are the same length, and this make the seat kinda “rough”. To obtain a smooth profile, the stool is milled with the help of a guide and no other processes are needed.

The trilobated shape of the seat is unusual, but it’s more comfortable, regardless of people’s different heights: since it mimics a bottom’s print, legs can immediately reach the floor and they are not pressed to the edge of a wider seat. This construction method allows to minimize scraps, and quickens the production, since all strips are worked at the same time. Moreover, if the plywood seat has some flaws, you can throw it away without discarding a big piece of wood. Plywood is really little expensive, and this, combined with the easiness of production method (single radius bent, waste reduction and one-gesture mill) sets price really really low. Even packaging is light and minimal, since the disassembled stool can fit into a 43×21×8cm box, providing great storage. The main body is painted but the top of the seat remains natural, to show how it’s made.

Ostrich Barstool

.:YYY:. — Mon, 15 Mar 2010 16:59:11 +0000

A finalist for the Most Beautiful Object in South Africa, the Ostrich Barstool defies conventional seating design for something whimsical and surprisingly comfortable. Inspired by a recent ride on an Ostrich, sounds fun! – the result is an upholstered seat with elegantly shaped steel legs based on an ostriches’ proportions.

Berta chair

.:YYY:. — Fri, 15 Jan 2010 05:38:05 +0000

The Austrian designer Alexander Gufler created this multi purpose chair made from a solid wood frame and plywood seat shells.

“In this shell chair the legs are held directly by the seat- and back shell. In combination with the substructure this parts become a stable unit. The intersection of the shells and legs results also into the armrest. The chair impresses with its easy-held outside and comfortable seating. Another focus has been laid on a low and good manufacturability.”

秀设计 » 椅子

绳索围绕的椅子

相关日志

M-Chair

相关日志

Cloth

相关日志

Stud

相关日志

Hat-Hat

相关日志

NEMO

相关日志

Fox & Freeze FF1 Lounge Chair

相关日志

Offset

相关日志

Ostrich Barstool

相关日志

Berta chair

相关日志